Its very important that you correctly prime the coil found inside the ecig tank for the first time if its brand new and never been used before. This is because you want the white cotton inside to absorb the liquid to prevent getting any dry hits. In most cases if you get the burnt taste even from a new coil its because you have not primed it properly. Once its burnt the cotton inside it will taste like that all the time even if you have cleaned it out and have washed it. Today you will learn the best way that e cig shops uses to properly prime an ecig coil.
1) Remove the glass tank from the coil by unscrewing it off.
2) The coil is the small metal screw type looking object that goes into the bottom base of the coil. This is what heats up the liquid when you press the button on the battery mod and transforms the e liquid into heated vapour for you to smoke.
3) Get your e liquid bottle and soak up the pipette. Place a few drops in the middle of the coil where you can see white cotton. Also you will see small holes placed around the coil, you also want a few drops to be poured into there. Basically you want to get the e liquid as close as possible into the coil.
4) Once you have primed the ecig coil properly, attach the glass tank with liquid back onto the bottom base. Allow it to sit for 5 minutes so all the e juice in the tank can soak into the bottom.
0 comments: